Trailer hitch chairs – The correct placement of the axle trailer can make the difference between a trailer that tows safely and easily and trailer that the danger for everyone at that time was being withdrawn. If it is placed too backward and the percentage of the weight of the load that picks up where the trailer hitch is too high, it will cause normal wear and tear on suspension of vehicles and tires. If placed too close to the trailer tongue weight won’t be enough, that will make the trailer sway is dangerous.
Start by measuring the length of the trailer or load platform box, but you do not specify a tongue trailer hitch chairs. Multiply the length by 0.4. The resulting number is the distance from the back of the cargo box to the center axis. For example, the calculation of the 10-foot box is as follows: 10 x 4 = 4. The shaft is also, in this example, only the Mount so that the center point of the axis four feet from the back of the trailer.
12 Photos Gallery of: Trailer Hitch Chairs Ideas
The mount point for the double-axis configurations are calculated in the same way as the previous one shaft, except that the amount calculated is the midpoint between the two of us. Using the same box of 10 ft loading as our previous example, you would do the sign of the four feet away on the back of the trailer hitch chairs. This sign is the Centre of the equalizer to the front and rear spring.